In 1965, Covercraft was opened for business by Bob Lichtmann in Southern California’s San Fernando Valley. At that time, it was just a 2-man operation, manufacturing custom-patterned car covers for street rods, the import sports car market and aftermarket automotive parts suppliers. During these first 40 years, Covercraft has grown to a team of over 400 employees and expanded into three manufacturing locations, with headquarters in historic Pauls Valley, 60 miles south of Oklahoma City.

Still family-owned, Covercraft has always maintained the highest standards, utilized the finest materials and remained on the cutting edge of manufacturing technology.....but it’s their people who assure they put “Covercraftsmanship” into everything they build!

2. Breathable - Air easily circulates through the fabric to help it dry quickly and reduce heat build-up under cover.

3. Dust / Pollution Barrier - The middle barrier layer acts as a filtration barrier against most airborne pollutants.

4. .Easy To Use - Won't shrink or stretch and retains it's tailored shape.

5. Three (3) Year Limited Warranty - Against defects in workmanship and/or the fabric becoming unserviceable during normal use. Covercraft will repair or replace, to the original purchaser, after required inspection.

Technalon® covers, made with Kimberly-Clark's Evolution® 4-layer non-woven polypropylene fabric, provide maximum protection in all weather conditions. Often imitated, but never equaled, U.S. made Evolution fabric covers are used by millions of satisfied car enthusiasts around the world.

Recent improvements include a stronger outer layer and softer inner layer. The inner layer is constructed with similar processes used for our Dustop™ interior storage covers - gentle protection for fine paint finishes (inner layer is now light gray). Through extensive testing in Florida K-C has confirmed Evolution has the highest UPF rating of all their non-woven fabrics. This is important because UV rays are what damage both the exterior AND interior of any vehicle. Block the UV rays - protect the vehicle!

1. Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.

2. Dries Easily - Moisture is not absorbed by the fabric fibers.

3. Breathable - Allows air to circulate through the fabric.

4. Dust / Pollution Barrier - The two middle layers of melt-blown fabric act as a filtration barrier against most airborne pollutants.

5. Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches

NOAH barrier fabric actually stops water, yet it "breathes" to allow any trapped moisture, seam seepage or condensation to easily evaporate. The unique construction process (patent pending) results in a cover with maximum all-weather protection...highly water resistant, dust resistant, UV resistant and breathable to make sure moisture and/or heat don't stay under the cover. Made in the U.S. by Kimberly-Clark, the fabric weighs only 4.75 oz./sq. yd., so it's easy to handle and fold.

Protective Outer Layers - A bi-component spunbond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness. A silver-gray color was selected because of its heat-resistant properties. The fabric is also treated with UV inhibitors for extended outdoor use.

Micro-Porous Middle Layer - The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.

Soft, Paint-Protecting Inner Layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the "soft touch" necessary for today's water-based paint finishes.

Material color available - Silver-Gray